S
ET
THE
IP A
DDRESS
Networked Indexer/Driver User Manual
ADVANCED MICRO CONTROLS INC.
108
2.2b Use the Embedded Web Server
PREREQUISITE:
You must know the present IP address of the Networked Driver. The factory default
address is 192.168.0.50.
PREREQUISITE:
Task 1.6:
Grounding and Powering the System
found on page 98. You must be able to
power the Networked Driver.
PREREQUISITE:
Tasks: 1.10 and 1.11, 1.12, or 1.13, starting on page 104. You must attach your Net-
worked Driver to your computer.
PREREQUISITE:
Optional Task A:
Configure Your Network Interfaces
. (page 141) The network inter-
faces on your computer must be on the same subnet before you can communicate with a Networked Driver.
2.2b.1 Disconnect the Networked Driver from the host controller and cycle power to the unit
This ensures that the unit does not have any open connections to the host controller.
2.2b.2 Start your web browser and connect to the Networked Driver
The internal HTML pages should work with any browser. Once your web browser is running, enter the pres-
ent IP address of the Networked Driver into the address bar. The default address is 192.168.0.50. The unit will
respond with the following page.
Figure T2.1 Networked Driver Information Webpage
