AMB 1400 FFF, Translation Of The Original Operating Instructions

Page: 15 / 36

15
Operating instructions
Attention!
Prior to use, check that the specifications of your
mains power supply correspond to the mains
voltage and mains frequency indicated on the
name plate.
▸
Before switching on, check the protective guard is
in good working order.
▸
Move the protective guard to the completely
open position and then let it go. The protective
guard must automatically return to the fully closed
position.
▸
Only use the device with a fitted cover plate
(see page 4).
▸
Ensure that a functional vacuum cleaner is
connected during working. For optimal dust
extraction, perform separating cuts in a clockwise
direction.
▸
Only press the lock button once the motor is
stationary (see page 4). The self-start-up lock
prevents the power tool from starting up automat-
ically if there is a loss of power (even of only very
short duration) during operation, e.g. due to the
mains plug being pulled out.
▸
Switch the power tool off and then back on again.
Maintenance and cleaning
WARNING!
Danger posed by electric current.
¾
Carry out maintenance and cleaning
work on the device only when the
mains plug has been removed.
¾
Repairs to power tools may only be
performed by an electrical specialist!
¾
A defective power cord may only be
replaced with a special, original
power cord.
CAUTION!
Dusts from materials can be harmful to
health.
¾
Use a dust mask or respirator.
▸
For safe and proper working, always keep the
machine and the ventilation slots clean.
Accessories and spare parts
The device has been produced according to best
practice and extensively tested at the factory. In the
unlikely event of a failure or defect, have it examined
and repaired by a AMB-ELEKTRIK workshop. For
all correspondence and spare parts orders, always
include the article number on the type plate of the
machine.
Use only accessories which satisfy the requirements
and technical data specified in this instruction
manual.
Disposal
Do not dispose of this device with
household waste. Dispose of the device
via an approved waste disposal
company or via your local authority
waste disposal facility. Observe the
currently valid regulations. In case of doubt, contact
your waste disposal facility. Dispose of all packag-
ing in an environmentally compatible manner.
Warranty
This AMB-ELEKTRIK GmbH device is covered by
warranty according to the applicable national
regulations. The warranty period begins on the date
of purchase (please retain invoice or delivery note
as proof of purchase). Damage that has occurred
will be corrected by replacement or repair. Damage
caused by improper handling is not covered by
the warranty. Claims under warranty shall only be
considered, if the device is returned fully assembled
to the service department of AMB-ELEKTRIK GmbH.
Subject to technical changes without prior notice.
We accept no liability for printing errors.