4.
Install the metering wheels
4
and intermediate
plates
1
in pairs.
5.
For uniform concentricity,
install the metering chambers with a uniform
offset
5
.
6.
Install the end plate
2
.
7.
Install the locking ring
3
.
CMS-I-00002551
6.4.17.4 Adjusting the metering volume
The volume of a metering roller can be modified by
repositioning, removing or inserting metering wheels.
You must select a metering roller volume that is not
too large or too small, but that is sufficient to spread
the required quantity of spreading material.
1.
Remove the locking ring
4
.
2.
Remove the end plate
3
.
3.
Remove the metering wheels
2
and
intermediate plates
1
.
CMS-I-00002550
4.
For uniform concentricity,
position the metering wheels without chambers
1
symmetrically at the centre
2
.
5.
Install the metering wheels and intermediate
plates.
6.
Install the end plate.
7.
Install the locking ring.
CMS-I-00002552
CMS-T-00003614-D.1
6 | Preparing the implement
Preparing the implement for operation
MG7508-EN-GB | B.1 | 31.08.2022 | © AMAZONE
82
