6.4.10 Adjusting the coulter harrow
6.4.10.1 Moving the coulter harrow into working position
6.4.10.1.1 Moving the coulter harrow into the shallow working position
When driving in reverse, the harrow tine
1
folds
to the front and rests on the locking pin
2
. As a
result, the harrow tine does not protrude into the
neighbouring coulters.
IMPORTANT
Damage to the coulters due to folded
harrow tines
Do not remove the locking pin.
NOTE
The adjustment of the harrow angle must be
adapted to the respective operating conditions.
The optimum adjustment can only be determined
during field operation.
1
2
CMS-I-00003184
1.
Lift the implement.
2.
To move the harrow tines
1
into the flat
working position,
Install the pin
2
in the hole shown.
The harrow tine is resting on the plate
3
.
3.
To check the setting,
seed for approx. 30 m at working speed and then
check the work pattern.
1
3
2
CMS-I-00003187
CMS-T-00006627-C.1
CMS-T-00009568-B.1
CMS-T-00009569-A.1
6 | Preparing the implement
Preparing the implement for operation
MG7508-EN-GB | B.1 | 31.08.2022 | © AMAZONE
66
