11.
Check the sealing ring before installation.
Replace in case of damage.
Install the sealing ring.
12. Install the TwinTeC cutting disc.
13. Install the bolts.
10.2.3 Checking the TwinTeC depth control wheel
INTERVAL
Every 50 operating hours
or
weekly
1.
Check the TwinTeC depth control wheel
1
.
2.
If the TwinTeC depth control wheel has cracks
or fractures,
replace the depth control wheel.
3.
Remove the nut and washer
2
.
4.
Replace the damaged TwinTeC depth control
wheel.
5.
Install the nut and washer.
1
100 Nm
2
CMS-I-00003243
10.2.4 Checking the TwinTeC cutting discs
INTERVAL
Every 50 operating hours
or
weekly
Original disc diameter
Wear limit
340 mm
300 mm
CMS-T-00004451-C.1
CMS-T-00004452-D.1
10 | Repairing the implement
Maintaining the implement
MG7508-EN-GB | B.1 | 31.08.2022 | © AMAZONE
121
