3.
Position the grid
2
such that a groove is at the
top.
4.
Take off the universal operating tool and allow the
catch
1
to engage in the groove.
5.
To check the setting,
seed for approx. 30 m at working speed and then
check the work pattern.
1
2
CMS-I-00006889
For fine seeds, cereals or legumes, the press roller
must be installed at different positions.
6.
Remove the nut
1
.
7.
Remove the washer
2
.
8.
Remove the bolt
5
.
9.
To spread fine seeds or cereals,
install the press rollers in the lower position.
or
To spread legumes,
install the press rollers in the upper position.
10. Install the bolt
5
.
11. Install the washer
2
.
12. Install the nut
1
and tighten it.
1
2
5
CMS-I-00006162
6 | Preparing the implement
Preparing the implement for operation
MG7508-EN-GB | B.1 | 31.08.2022 | © AMAZONE
64