Danger due to welding work
Improper welding work, particularly on or close to safety-related components, endangers the operational
safety of the implement. This can result in accidents and serious personal injury or even death. Safety-
related components include, for example, hydraulic components and electronic components, frames,
springs, coupling devices to the tractor such as the 3-point mounting frame, drawbars, trailer support,
trailer coupling, tensioned crosspiece as well as axles and axle suspensions, lines and tanks containing
flammable substances.
Allow only qualified specialist workshops with suitably approved personnel to perform welding work on
safety-related components.
Only allow qualified personnel to perform welding work on all other components.
If you have doubts as to whether a component can be welded,
ask a qualified specialist workshop.
Before welding on the implement,
uncouple the implement from the tractor.
2.1.5.3 Operating materials
Unsuitable operating materials
Operating materials that do not meet AMAZONE requirements can cause implement damage and
accidents.
Only use operating material that meet the requirements in the Technical Data.
2.1.5.4 Special equipment and spare parts
Special equipment, accessories, and spare parts
Special equipment, accessories, and spare parts that do not meet AMAZONE requirements can impede
the operational safety of the implement and cause accidents.
Only use original parts or parts that meet AMAZONE requirements.
If you have any questions regarding special equipment, accessories or spare parts,
contact your dealer or AMAZONE.
CMS-T-00002324-C.1
CMS-T-00002325-B.1
2 | Safety and responsibility
Basic safety instructions
MG7508-EN-GB | B.1 | 31.08.2022 | © AMAZONE
16
