10.2.2 Checking the TwinTeC cutting disc distance
INTERVAL
Every 50 operating hours
or
weekly
1.
Rotate the TwinTeC cutting disc
1
.
The opposite disc rotates along. The spacing is
correctly set.
2.
If the opposite disc does not rotate along,
adjust the cutting disc distance.
1
CMS-I-00003244
3.
Remove the bolts
8
.
4.
Remove the TwinTeC cutting disc
7
.
5.
Remove the sealing ring
5
.
6.
Remove the central bolts
6
.
NOTE
The central bolts have different threads:
The right central bolt has right-hand thread
The left central bolt has left-hand thread
7.
To ensure that the TwinTeC cutting discs touch
slightly,
adjust the spacing of the TwinTeC cutting discs
with the spacer discs
4
and
2
.
8.
Install spacer discs that are not required on the
opposite side of the cutting disc bearing
3
with
the central bolt.
9.
Install the cutting disc bearing on the coulter
1
.
10. Install the central bolt.
100 Nm
1
3
4
6
7
8
5
2
17 Nm
CMS-I-00003234
CMS-T-00004447-D.1
10 | Repairing the implement
Maintaining the implement
MG7508-EN-GB | B.1 | 31.08.2022 | © AMAZONE
120