NOTE
The adjustment of the exact following harrow
pressure must be adapted to the respective
operating conditions. The optimum adjustment
can only be determined during field operation.
1.
Turn the lever
1
out of the transport lock
2
and
pull it up.
2
1
CMS-I-00004673
2.
To increase the exact following harrow
pressure,
remove the linch pin
2
and insert it in a higher
hole under the stop
1
or
To reduce the exact following harrow pressure,
remove the linch pin
2
and insert it in a lower
hole under the stop
1
.
3.
Relieve the lever and fasten it in the transport
lock.
4.
To check the setting,
seed for approx. 30 m at working speed and then
check the work pattern.
2
1
CMS-I-00004671
6 | Preparing the implement
Preparing the implement for operation
MG7508-EN-GB | B.1 | 31.08.2022 | © AMAZONE
74
