Amano PIX-200, Operation Manual

Page: 40 / 48

5-2
Amano PIX-200 Operation Manual
Error Codes
In the event of an error, an error code will appear in the display. The error
codes are listed below with their possible causes and solutions. The error
code will be displayed for 2.5 seconds.
Error Code Cause
Error 02
Home Sensor Error when starting imprint
Error 03
Timing Sensor Error
Error 04 Home Sensor Error when finishing imprint
Error 05 Printing Length Setting Error
For error codes
02
through
04
, unplug the clock before checking to see that
the carriage is not stuck or jammed. Also, check to see that the ribbon cables
are in good condition and that the ribbon cassette is correctly inserted in
place. After clearing any jams, plug the clock back in.
The
05
error code signifies that the print length should be changed by
adjusting the Year Digit, Type of Hour, Language type, and Digit Number.
If the error does not disappear, please contact your AMANO Cincinnati, Inc.
representative
for assistance.
Note: Printing errors can be caused by the absence of grease on the printing
carriage mechanism. If this occurs, the carriage mechanism may not
slide smoothly. This movement restriction may cause the printer to
display a print error and stop working. If this occurs, apply white silicone
grease to the horizontal metal plate that the carriage mechanism slides
against. This is illustrated in the following drawing,
Place white silicone
grease here