Amano PIX-200, Operation Manual

Page: 21 / 48

Amano PIX-200 Operation Manual
3-9
Changing the Print Position
The illustrations to the right show samples of the displays. The shaded area
means that the symbols, numbers or characters are blinking.
You can set the print position in two directions
(the left or right side of the paper). The factory
default is set to imprint on the right side of the
paper.
To change print direction perform the
following:
1.
Unlock and remove the cover.
2.
Press the (+ ) and ( E ) buttons on the top
of the unit at the same time, holding down
for 2 seconds until
SEt UP Pro9 appears
on the display. The “ ▲ ” on the top of the
display will be blinking.
3.
Press the ( + ) button three times to position
the “ ▲ ” under the THU .
4.
Press ( E ) button once to display “ Prn Po5n
ri9ht ” blinking.
5.
Press the ( - ) or ( + ) button to change the
display to “ LEFt ” blinking.
6.
Press the ( E ) button once to confirm the
setting, and return back to the “ SEt UP
Pro9 ” display.
Setting the Print Pattern
The following illustrations show samples of the displays. The shaded area
means that the symbols, numbers or characters are blinking.
In this setup, the Year digit, the print of Hyphen (-) between month and date,
the printing type of Hour, the printing type of Minutes (Refer to
page 6-4
“Diagram of Printing Type of Minutes”), the Language, the preprogrammed
comment, the type of Zero and the print of Leading Zero can be set.
△ △ △ ▲ △ △ △
８ ＳＥｔ ８ ＵＰ ８
８ Ｐ ｒｏ
９ ８
△ △ △ ▲ △ △ △
Ｐｒｎ ８ Ｐｏ５ｎ
８ Ｌ ＥＦ
ｔ ８
△ △ △ ▲ △ △ △
Ｐｒｎ ８ Ｐｏ５ｎ
８ ｒ ｉ９ｈｔ
Blinking
MON TUE WED THU FRI SAT SUN
MON TUE WED THU FRI SAT SUN
MON TUE WED THU FRI SAT SUN