Amano PIX-200, Operation Manual

Page: 18 / 48

3-6
Amano PIX-200 Operation Manual
10.
To enter the comments on Line 2, Press ( E )
and press ( + ) when the line number is
blinking. You can program line 3 by
repeating the previous steps.
11.
Once you finish programming Customized
Comments, press the (
E ) button to go back
to the “ P1 inPut CodE ” Display.
12.
If you want to check the printing length,
press the (
E ) button and select the line by
pressing the ( - ) or ( + ) button. You will see
the length in mm to the left of the blinking
line number. (The sample display on the
right shows that line 1 is 35mm)
Note: When the value exceeds the maximum length (35mm), the “ Error 05 ”
will appear on the display when you put the cover on. Please refer to
page 5-2, “Error Codes”.
Note: You can choose the character font when programming the customized
comments. In order to make the imprint clearer, we recommend you to
use Two-Byte Font. Please refer to
page 6-3, “Diagram of Font”.
Use the following codes to edit the customized comments:
Code Function
in Insert character
dL Delete character
En End of the sentence
Use the following codes to change the font for customized comments:
Code Function
J Start Two-Byte
Jn Undo Two-Byte
L Start Emphatic Byte
LL Start Double-Width Byte
Ln Undo Emphatic/Double-Width Byte
Un Undo Space Character
Sample of changing the font of “D” “E” “F” from One-Byte to Two-Byte
ABCDEFGHI → 41, 42, 43, 44, 45, 46, 47, 48, 49
ABC
DEF
GHI → 41, 42, 43,
in
,
J
, 44, 45, 46,
in
,
Jn
, 47, 48, 49
See Chapter 6 – Appendix, and the paragraph “Diagram of Character Code”
for more information on codes.
△ △ ▲ △ △ △ △
Ｐ１ ８ ｉｎＰｕｔ
８ Ｃ ｏｄ
Ｅ ８
△ △ ▲ △ △ △ △
Ｐｒｎ ８ ＬｉｎＥ
３５ ８ １ ８８
Blinking