manualshive.com logo in svg

Amano PIX-200, Operation Manual

The Amano PIX-200 is a versatile time clock system designed for efficient employee time tracking. With its user-friendly interface, you can easily navigate through its features and functions. For detailed instructions, the comprehensive Operation Manual is available for free download at manualshive.com.

Share
Download
background image

 

Amano PIX-200 Operation Manual 

1-1

 

Chapter 1: Overview 

Before attempting to use the Amano PIX-200 time recorder/stamp, please 
carefully review Chapter 1: “Overview”, and Chapter 2: “Getting Started”. This 
chapter of the manual covers the specifications, accessories, names and 
functions of parts, LCD Display, description of controls, and print position 
adjustment. 

 

Specifications 

Power Requirements:

 

• 

Power Supply: 

DC 15V  

• 

Power Consumption:  1.2A  

• 

Battery: 

Optional Lithium Battery for full power reserve 
in case of power failure. 

Ambient Temperature:

14°F to 113°F (-10°C to 45°C) 

 

32°F to 104°F (0°C to 40°C) if using NiMH 
battery option  

Ambient Humidity: 

10% to 90% (non-condensing) 

Dimensions: 

6-1/4"(159 mm) Wide X 6-1/2”(165 mm) High X 
6-3/4"(171 mm) Deep. 

Weight: 

Approximately 4.85 lbs. (2.2 kg) 

Environment: 

Indoor use only; dust-free environment. Keep 
out of direct sunlight. 

 

Accessories 

 

The following accessories are provided with the Amano PIX-200. After 
unpacking, please ensure that all of the following items are provided: 

 

 
 
 
 
 
 

PIX-200 (1 unit) 

 
 
 
 
 

 

This operation 

manual (1 copy) 

 
 
 
 
 
 

Keys (one pair, 2 

keys) 

 

• 

Please note that specifications, appearance, and/or description are 
subject to change without notice due to product enhancements. 

• 

This manual has been carefully prepared, but Amano assumes no liability 
for errors and/or omissions. If you should find any errors or unclear 
information, please contact your Amano dealer. 

 

Operation

Manual 

Summary of Contents for PIX-200

















































Reviews:

No comments

Related manuals for PIX-200

Insignia NS-DPFC01 (French) Manual De L'Utilisateur preview
NS-DPFC01
Brand: Insignia Pages: 29
Radio Shack 63-993 Owner'S Manual preview
63-993
Brand: Radio Shack Pages: 2
Coby CR-A68 User Manual preview
CR-A68
Brand: Coby Pages: 1
BASETech BT-1680896 Operating Instructions preview
BT-1680896
Brand: BASETech Pages: 4
Salora 8720085000871 Instruction Manual preview
8720085000871
Brand: Salora Pages: 17
Lindy 20983 Installation And Use preview
20983
Brand: Lindy Pages: 1
SOUNDMASTER SCD2000 Manual preview
SCD2000
Brand: SOUNDMASTER Pages: 19
Qudo QUDOC200BK Instruction Manual preview
QUDOC200BK
Brand: Qudo Pages: 10
SkyScan 86715 Instruction Manual preview
86715
Brand: SkyScan Pages: 7
ETC ECHOFLEX Wireless TimeClock Configuration Manual preview
ECHOFLEX Wireless TimeClock
Brand: ETC Pages: 36
Equity 30226 Manual preview
30226
Brand: Equity Pages: 4
Venturer CR8030iE5 Quick Setup Manual preview
CR8030iE5
Brand: Venturer Pages: 2
TFA DESIGN 98.1049 Operating Instructions preview
DESIGN 98.1049
Brand: TFA Pages: 2
iHome HDL95 Quick Start Manual preview
HDL95
Brand: iHome Pages: 8
iHome IM14 Instruction Manual preview
IM14
Brand: iHome Pages: 17
Casio 2529 User Manual preview
2529
Brand: Casio Pages: 3
Casio 2736 Operation Manual preview
2736
Brand: Casio Pages: 7
Elta 4569 Manual preview
4569
Brand: Elta Pages: 100

Brands by name

Popular brands

Load more brands