![background image](http://html1.mh-extra.com/html/amano/pix-200/pix-200_operation-manual_2918152009.webp)
Amano PIX-200 Operation Manual
2-1
Chapter 2: Getting Started
Before using the Amano PIX-200 time recorder/stamp, please carefully review
this chapter of the manual, which covers removing cover and packing material,
mounting, and performing a test print.
Removing the Cover & Packing Material
You must remove the packaging spacers from the printer block and the Printer
Carriage before attempting to use your PIX-200.
Step 1. Insert the key provided and turn the key counter clockwise to
unlock
the cover.
Step 2. Lift the
cover to remove.
Step 3. Remove the spacers between the Ribbon Cartridge and the Printer
Carriage.
Step 1
Step 2
Step 3
Mounting
When choosing a mounting location for your PIX-200, you should consider the
following:
•
The mounting surface or hardware must be capable of supporting the unit’s
weight, 2.2 kg (4.85 lbs).
•
The area must be within the specified operating temperature range:
14°F~113°F (-10°C~45°C), 10% ~90% relative humidity.
•
The unit should be in close proximity to a power source or wall outlet.
•
The following conditions should not exist:
•
The unit should be mounted in a place able to receive radio signals for
atomic clock signal reception (see page 4-2, for more details).
Spacer
Spacer
Summary of Contents for PIX-200
