Amano PIX-200 Operation Manual
3-1
Chapter 3: Program Mode
Make sure the AC power adapter is plugged in and connected to the PIX-200
before making changes to the clock settings. Unlock and remove the cover.
Locate the
(-)
,
(+)
,
E
,
+1 HOUR
, and
+1 MIN.
buttons on top of the clock.
Note:
Replacing the cover during any step of programming will return the
clock to normal date and time display.
Setting the Time
(If the Time Displayed is Incorrect)
The illustrations on the right show samples of the displays. The shaded area
means that the symbols, numbers or characters are blinking.
To set the correct time perform the following:
1. Unlock and remove the cover.
2. Press the (
+
) and (
E
) buttons on the top of
the unit at the same time, holding down for 2
seconds until
Set UP Pro9
appears on the
display. The “
▲
” on the top of the display
will be blinking.
3. Press the (
-
) or (
+
) buttons to position the
“
▲
” under
MON
.
4. Press the (
E
) button once to display the time
and the Hour display will be blinking. While
the Hour display is blinking, adjust time to
the desired hours using the (
-
) or (
+
) buttons.
Once you have the correct hour, press the
(
E
) button to confirm and move to the
minute.
5. While the Minute display is blinking, adjust
the minutes using the (
-
) or (
+
) buttons to
obtain the desired minutes. Once you have
the correct minute, press the (
E
) button to
confirm and move to the seconds. The
seconds will start from “
00
” at the time you
press the (
E
) button. However, if you did not
change the minute, the seconds will not change.
6. The display will return to the clock display.
If you need to return to the “set up program”
[
Set UP Pro9
], press the (
E
) button again.
Replace the cover and the display will
automatically return to normal date and time
display.
▲
△
△
△
△
△
△
8
SEt
8
UP
8
8
P
ro
9
8
▲
△
△
△
△
△
△
8888
8888
07
:
54
:
00
▲
△ △ △ △ △ △
8888
8888
08:53
:00
MON TUE WED THU FRI SAT SUN
MON TUE WED THU FRI SAT SUN
MON TUE WED THU FRI SAT SUN
Blinking
Summary of Contents for PIX-200
