Amano PIX-200, Operation Manual

Page: 35 / 48

Amano PIX-200 Operation Manual
4-3
−
Close to furniture made of steel, such as steel desk.
−
In places generating radio interference, such as near construction sites,
airports or in heavy traffic.
−
Inside a vehicle, train or airplane.
Setting the Atomic Clock
(Germany, UK and others)
In this setup, you can select DCF in Germany, MSF in UK or disable the
Atomic Clock function. The factory default is set to DCF in Germany.
1. Unlock and remove the cover.
2. Press ( + ) and ( E ) button on top of the unit at
the same time, holding down for 2 seconds
until “
SEt UP Pro9 ” appears on the display.
2. Press the ( + ) button eleven times to position
the “ ▲ ” alongside the 5
th
line down from the
upper righthand corner of the display
alongside “OTHERS” (on the label).
3. Press ( E ) button and you will see
“ P1 LCd diSPly ” display. Press ( + ) button
3 times to advance to “ P4 CloC 5Ync ”
display.
4. Press ( E ) button to select official standard
Atomic Clock frequency or disable the
Atomic Clock. If you are in Europe, you can
select from “
GErAny ” (DCF in Germany),
“ britAN ” (MSF in UK) or “ oFF ”. (Disable the
atomic clock) by pressing ( - ) or ( + ) button.
In case of other countries, you can select
either “
on ” or “ oFF ” by pressing ( - ) or ( + )
button.
5. Press ( E ) button to confirm your setting and
return to “ SEt UP Pro9 ” display
△ △ △ △ △ △ △
Ｐ４ ８８ ＣＬｏＣ
８ ５
Y
ｎ
Ｃ ８
△ △ △ △ △ △ △
ＣＬＣ ８ ５ｙｎＣ
９ＥｒＡ
Ｎｙ
△ △ △ △ △ △ △
８ ＳＥｔ ８ ＵＰ ８
８ Ｐ ｒｏ
９ ８
▲
△ △ △ △ △ △ △
８ ＳＥｔ ８ ＵＰ ８
８ Ｐ ｒｏ
９ ８
▲
MON TUE WED THU FRI SAT SUN
MON TUE WED THU FRI SAT SUN
MON TUE WED THU FRI SAT SUN
MON TUE WED THU FRI SAT SUN
▲
▲
Blinking