![background image](http://html1.mh-extra.com/html/amano/pix-200/pix-200_operation-manual_2918152033.webp)
Amano PIX-200 Operation Manual
4-1
Chapter 4: Atomic Clock Feature
The PIX-200 has the atomic clock (radio-controlled clock) feature which
displays the current time precisely by automatically receiving time code
signals on long wave radio from a transmitting station. The unit receives the
time code signal via its built-in antenna system.
PIX-200 can receive standard frequencies from the countries listed in the
following table.
Country
Specification
Offical Standard
Frequency
Transmitting Station
United States
Standard
WWVB/60kHz
Fort Collins, Colorado
Germany Optional
DCF/77.5kHz
Mainfligen,
Frankfurt
United Kingdom
Optional
MSF/60kHz
Rugby
Japan
Optional
JJY/40kHz
Fukushima (East Japan)
Optional
JJY/60kHz
Saga (West Japan)
In the United States for more information about the WWVB-Radio signal visit
NIST’s
website at:
www.boulder.nist.gov
For actual signal coverage in North America visit:
http://www.boulder.nist.gov/timefreq/stations/wwvbcoverage.htm
Note:
The atomic clock function is only available for the country in which you
have purchased PIX-200.
The Atomic Time Synchronization Indicator in the LCD display indicates the
status of the signal as illustrated below.
Automatic Reception
•
The atomic clock feature will automatically start searching for time code
signals under the following conditions. (Refer to paragraph “PIX-200
Atomic Clock/Time Code Signal” at the end of this chapter for details
about reception duration)
Searching
for Signal
Completed Time
Synchronization
Blinking
Found
Signal
Time
Synchronization
Failure
Summary of Contents for PIX-200
