3-20
Amano PIX-200 Operation Manual
If the PIX-200 requires a password
•
When you press the (
+
) and (
E
) button at the same time for 2 seconds to
enter the “set up program” display.
•
When you press the (
+1 HOUR
) or (
+1 MIN.
) button to change the time.
In case you forget the password
You can enter the “set up program” display by entering “1441”. Make sure you
only use the (
-
) button when you input this password or this password will not
work.
Note:
Once a password has been entered, whenever you attempt to press the
(+
) and (
E
) buttons on the top of the unit at the same time, and hold
down for 2 seconds you will see PASS “
_ _ _ _
”
with the left
“
_
” blinking
to begin entering the 4 digit password. Once the correct password has
been entered,
SEt UP Pro9
will appear on the display and you can
perform changes to setup.
Summary of Contents for PIX-200
