DTMF
Programming
Installation and Programming Manual
3-15
When permission has been granted and the mailbox owner enables remote
notification, the MiniSOHO first dials the external access digit (programmed using
code *340) and then dials the mailbox owner’s remote telephone or pager number.
Note: Make sure that you enter the remote telephone or pager number before
enabling remote notification.
Notification is always done on the second line.
3.6.3.1 Setting Notification for Mailboxes
Note: Do not forget to enter programming mode by dialing *900 and the
administrator’s password before using the programming commands.
Note: Virtual mailboxes do not have extensions and may not be configured for
internal notification.
Table 3-6 Commands to Program Notification for Mailboxes
OPERATION
COMMAND
Setting local notification for a range
of mailboxes
*700 + First M Last M X + #
where
X = 0 means notification is disabled
X = 1 means Message Light On 1 is selected
X = 2 means Message Light On 2 is selected
X = 3 means Sign Rings is selected
X = 4 means Rings is selected
Disable local notification for all
mailboxes
*700 + #
Setting local notification for one
mailbox
*701 + M X + #
where X is defined as above
Permitting remote notification for a
range of mailboxes
*710 + First M Last M Y + #
where
Y = 0 means remote notification is not permitted
Y =1 means remote notification is permitted
