Programming the In-Band DTMF Protocol
Installation and Programming Manual
6-3
Table 6-1 Entering an In-Band DTMF Code Using a Telephone (continued)
DTMF CHARACTER
NUMBER TO DIAL
Target
*2, indicates called extension number
Note: Dial *2 for each digit in the extension. For
example, if your PBX is configured to support a 3-
digit extension, dial *2 three times.
6.1.2 Selecting an Operation Type
You can program each event to perform an operation. To select an operation type,
enter:
*201 + XX + YY
XX indicates the event number (00-19)
Y indicates the operation to be performed by the MiniSOHO according to the
following options:
00 = Play the Automated Attendant’s Opening Script
01 = Leave a message in a designated mailbox
02 = Retrieve messages from a designated mailbox
03 = Play a specific script
1
04 = Play the busy menu
05 = Play the No-Answer menu
06 = Play the Do Not Disturb menu
07 = Disconnect the call
08 = Record the conversation
09 = Play a specific script and change to 1
st
language
1
10 = Play a specific script and change to 2
nd
language
1
11 = Play a specific script and change to 3
rd
language
1
12 = Play the Directory Listing (DBN)
13 = Transfer to a mailbox
1
14 = Transfer to an extension
1
15 = Transfer to the operator
1
= A destination must be defined for these tasks. The destination of these
operations is determined through code *202.
