Installation and Programming Manual
3-1
3. DTMF
PROGRAMMING
The MiniSOHO can be programmed by:
x
Telephone using DTMF tones
x
Computer using the Voice Mail Utility Program (see Section 4)
This section describes programming the MiniSOHO using DTMF tones.
Note: You will hear a confirmation tone every time you enter a programming
command.
3.1 Entering and Exiting the Programming Mode
The MiniSOHO does not handle calls when in the programming mode.
¾
To enter the programming mode:
1. Connect a PBX analog line to the MiniSOHO.
2. Call the PBX analog line from any touch-tone telephone.
3. Wait until the MiniSOHO answers and plays the opening menu. Then dial
*900.
4. Dial the System Administrator’s password (the default password is 1234)
to enter the programming mode.
¾
To exit the programming mode:
x
Dial *900.
–or–
Do not dial for one minute.
Note: If you exit the programming mode by dialing *900, the MiniSOHO plays the
opening menu and you can then test the changes made to the system.
