DTMF Programming
3-30
Installation and Programming Manual
3.8.1.2 Changing the Operator’s Password
The System Administrator can change the operator’s password by dialing code
*900 to enter the programming mode, dialing the System Administrator’s password
and then dialing:
*601 + * + Old Pa New Pa #
Operator’s password must be 4 digits.
Warning: Do not use * and # keys.
To disable the operator’s password, enter “0000”.
3.8.1.3 Resetting the Mailbox Password
The System Administrator can reset a mailbox password to its default (1234) by
dialing code *900 to enter the programming mode, dialing the System
Administrator’s password and then dialing:
*570 + XXXX + #
where XXXX is the mailbox number.
The mailbox password can be changed by the mailbox owner. Please refer to
section 5.4.4 for more information.
3.8.2 Activate Force Reorganize
The force reorganize option automatically reorganizes and optimizes the data
stored in the MiniSOHO.
The system administrator can activate the Force Reorganize option by calling the
MiniSOHO and, during the opening greeting, dialing:
*900 + Pa *610
Important: This option cannot be deactivated, and
should be activated by a certified technician only.
