Programming the In-Band DTMF Protocol
6-6
Installation and Programming Manual
*2*2*2 indicates the 3-digit extension number (Since The Extension is
calling its mailbox, target is used instead of source)
# indicates the end of the In-Band DTMF code.
2. Dial *201 00 02
*201 is the programming code to select an operation
00 is the event number ,02 is the MiniSOHO’s operation type that indicates
retrieving messages from a mailbox.
¾
To program the MiniSOHO to detect an In-Band DTMF code
from the PBX and enable an internal caller to leave a message in a
mailbox (***3 *** Source Target *1):
1. Dial *200 02 ** ** ** 3 *905 *2*2*2 ** 1 #
*200 is the programming code to define an In-Band DTMF code
02 is the event number assigned by you to the In-Band DTMF code
Each * in the above PBX DTMF code is replaced by **
*905 is a wild card programming the MiniSOHO to ignore 5 DTMF
characters (*** Source)
*2*2 *2indicates the 3-digit target extension number
# Indicates the end of the In-Band DTMF code.
2. Dial *201 02 01
*201 is the programming code to select an operation
02 is the event number
01 is the MiniSOHO’s operation type that indicates leaving a message in a
mailbox.