DTMF Programming
3-12
Installation and Programming Manual
Table 3-4 Commands to Create Mailboxes (continued)
OPERATION
COMMAND
Defining whether to play or skip the
time and date stamp during message
playback for a range of mailboxes
*530 + First M Last M B + #
where
B = 0; Play the date and time stamp (default)
B = 1; Skip the date and time stamp
Defining whether to play or skip the
time and date stamp during message
playback for one mailbox
*531 + Mailbox B + #
where
B = 0; Play the date and time stamp (default)
B = 1; Skip the date and time stamp
Defining a language for a range of
mailboxes
*532 + First M Last M Z + #
where
Z = 1, 2 or 3 (language number)
Defining a language for a mailbox
*533 + Mailbox Z + #
where
Z = 1, 2 or 3 (language number)
3.6.2 Creating Mailbox Groups
You can create up to four mailbox groups for distributing messages. Each mailbox
group can contain up to twenty mailboxes. The group numbers are by default 000,
001, 002 and 003. Group 099 consists of all mailboxes (real and virtual).
You can select a different number for the first digit of the mailbox groups using
code *545. Make sure that you select a number that does not interfere with your
PBX’s numbering plan.
Note: Do not forget to enter programming mode by dialing *900 and the
administrator’s password before using the programming commands.
