DTMF Programming
3-28
Installation and Programming Manual
Table 3-9 Commands to Program the Transfer Modes
OPERATION
COMMAND
Transfer mode for all extensions
*350 + X + Y
where
X = 1; All extensions except the operator
X = 2; Operator extension only
Y = 0; Non-Supervised (Default)
Y = 1; Supervised
Y = 2; Semi-Supervised
3.7.5.1 Detecting a Busy Extension
If the MiniSOHO detects a busy extension, it performs a Recall-from-Busy and by
default plays system message 96 (if the extension has a mailbox) or 103 (if the
extension does not have a mailbox). Refer to Section 3.7.5.3 for information on
changing the default system messages.
3.7.5.2 Detecting a No Answer from an Extension
If the MiniSOHO does not detect an answer from the extension, it performs a
Recall-from-No-Answer and by default plays system message 97 (if the extension
has a mailbox) or 104 (if it does not have a mailbox). Refer to Section 3.7.5.3 for
information on changing the default system messages.
3.7.5.3 Changing the Busy and No Answer Menus
System messages 96, 97, 103, and 104 are default messages. The System
Administrator can replace the system messages with script messages as follows:
x
System message 96 (Busy and the extension has a mailbox) is replaced by
script message 21 in the first language, script message 31 in the second
language and 41 in the third language.
x
System message 103 (Busy and the extension does not have a mailbox) is
replaced by script message 22 in the first language, script message 32 in the
second language and 42 in the third language.
x
System message 97 (No-Answer and the extension has a mailbox) is replaced
by script message 23 in the first language, script message 33 in the second
language and 43 in the third language.
