Alpine INE-S920E Owner'S Manual Download

Page: 163 / 188

31-A (EN)

ALPINE INE-S920E/INE-Z928E 68-21057Z31-A (EN)

3.8 Watching the simulation of the route

You can run a simulated navigation that demonstrates the active route. Do as follows:

1. In the Navigation menu, tap

2. Tap

3. Tap

. The simulation starts from the starting point of the route, and

using a realistic speed, it leads you through the whole recommended route.

1. (optional) You have the following controls during the simulation:

: Jump to the next route event (manoeuvre).

: Pause the simulation.

: Jump to the previous route event (manoeuvre).

: Tap to increase the speed of the simulation to 4, 8 or 16 times faster.

Now tap again to return to the normal speed.

Summary of Contents for INE-S920E





























































































































































































Search results

Summary of Contents for INE-S920E

Reviews:

Related manuals for INE-S920E

Brands by name

Popular brands

Alpine INE-S920E, Owner'S Manual

Search results

Summary of Contents for INE-S920E

Reviews:

Related manuals for INE-S920E

Brands by name

Popular brands