18
-EN
01GB04INE-S920E.fm
ALPINE INE-S920E/INE-Z928E 68-21057Z31-A (EN)
Initial System Start-Up
Be sure to press the RESET switch when using the unit for the first
time, after changing the car battery, etc.
1
Turn off the unit power.
2
Press
(Release) to remove the front panel.
3
Press
RESET
with a ballpoint pen or similar pointed
object.
*
The microSD memory card does not support Music/Video playback.
For details on how to use microSD memory cards, refer to
“Navigation system OM” on the supplied CD-ROM.
Inserting/Ejecting a Disc
1
Insert the disc with the label side facing up.
When you insert the disc up to certain point, it is
automatically pulled into the unit. The unit starts to play the
disc.
•
Do not touch the surface of the disc directly with your fingers.
•
Before inserting or removing the disc, always turn the ignition key to
ACC or ON. You cannot remove or insert the disc with the ignition
key turned to OFF.
1
Press
(Eject).
When the disc has been ejected part way, take it out.
•
If the disc cannot be ejected by pressing
, press and hold
again
for at least 5 seconds.
Adjusting the Volume
Rotate the
Rotary encoder
until the desired sound is
obtained.
Volume: 0 - 35
Lowering Volume Quickly
Activating the Audio Mute function will instantly lower the volume
level by 20 dB.
1
Press Rotary encoder to activate the MUTE mode.
The audio level will decrease by about 20 dB.
2
Pressing Rotary encoder again will bring the audio
back to its previous level.
Inserting the Disc
Removing the Disc
RESET switch
microSD memory card slot
*
Disc Slot
01GB00INE-S920E.book Page 18 Tuesday, June 12, 2012 10:56 AM