Alpine INE-S920E Owner'S Manual Download

Page: 138 / 188

ALPINE INE-S920E/INE-Z928E 68-21057Z31-A (EN)

3.1.2.2 Searching for a Place of Interest using preset categories

The Preset search feature lets you quickly find the most frequently selected types of Places.

1. In the Navigation menu, tap the following buttons:

2. The preset search categories appear:

If an active route exists, petrol stations are searched along the route.

If there is no active route (destination is not selected), they are searched
around the current position.

If the current position is not available either (no GPS signal), they are
searched around the last known position.

If an active route exists, parking lots are searched around the destination
of the route.

If there is no active route (destination is not selected), they are searched
around the current position.

If the current position is not available either (no GPS signal), they are
searched around the last known position.

If an active route exists, restaurants are searched along the route.

If there is no active route (destination is not selected), they are searched
around the current position.

If the current position is not available either (no GPS signal), they are
searched around the last known position.

Summary of Contents for INE-S920E





























































































































































































Search results

Summary of Contents for INE-S920E

Reviews:

Related manuals for INE-S920E

Brands by name

Popular brands

Alpine INE-S920E, Owner'S Manual

Search results

Summary of Contents for INE-S920E

Reviews:

Related manuals for INE-S920E

Brands by name

Popular brands