31-A (EN)
ALPINE INE-S920E/INE-Z928E 68-21057Z31-A (EN)
57
3.4.7 Changing the road types used in route planning
To recalculate the active route with different road type preferences, do as follows. These
changes can also be made in Settings.
1. On the Map screen, tap
and then tap
.
2. Tap any of the listed road types to modify the route. If needed, scroll the list for all road
types. You have the following options (their order depends on the selected vehicle
type):
x
- You might need to avoid motorways when you are driving
a slow car or you are towing another vehicle.
x
- Charge roads are pay roads where you can purchase a
pass or vignette to use the road for a longer period of time. They can be
enabled or disabled separately from toll roads.
x
- The software includes toll roads (pay roads where there is
a per-use charge) in the routes by default. If you disable toll roads, your
software plans the best toll-free route.
x
- The software includes ferries in a planned route by
default. However, a map does not necessarily contain information about the
accessibility of temporary ferries. You might also need to pay a fare on ferries.
x
- The software excludes unpaved roads by default:
unpaved roads can be in a bad condition and usually you cannot reach the
speed limit on them.
3. Tap
to confirm the changes. The software recalculates the route.
The orange line now shows the new recommended route.
