ALPINE INE-S920E/INE-Z928E 68-21057Z31-A (EN)
48
5. After a short summary of the route parameters, the map appears showing the entire
route. The route is automatically calculated. Tap
to modify route
parameters, or tap
and start your journey.
3.1.7 Entering the coordinate of the destination
You can also select a destination by entering its coordinate. Do as follows:
1. In the Navigation menu, tap
.
2. Open
the
menu and tap
.
3. You can enter the latitude and longitude values in any of the following formats: decimal
degrees; degrees and decimal minutes; or degrees, minutes and decimal seconds.
4. (optional) If necessary, tap
then
and enter
the coordinate in UTM format.
5. When finished, tap
.
6. A full screen map appears with the selected point in the middle. If necessary, tap the
map somewhere else to modify the destination. The Cursor (
) appears at the new
