background image

Page  1

Holden, Chevrolet & GMC 
Caravan/Trailer Camera System

•  If this Installation requires opening the factory monitor or radio to insert ribbon cables or sub boards, Advanced 

ICE Pty Ltd advises that the installation be carried out by an installer with experience working with electronic circuit 

boards. Advanced ICE highly recommends the use of a suitable workbench with Antistatic Mat and Earth Strap to 

avoid possible damage from a static charge. Advanced ICE Pty Ltd does not accept any responsibility for damaged 

caused either to the components in the vehicle or the product, so please do not proceed with the installation if you 

do not accept these terms.

•  All labels on the product including software versions and serial numbers must not be covered, damaged or removed. 

This may void the warranty on the product.

•  Ensure that all left over accessories, including remote controls and cables, are given to the customer. If replacements 

are required in the future they will be charged. 

•  Please ensure the installation of this product will not interfere with any factory safety equipment (e.g. Airbags)
•  If working with Airbags, be sure to disconnect the vehicle Battery before beginning work. This product and the  

following instructions are designed for installation by a qualified 12v installer, car audio installer or auto electrician. 

•  Interfaces  and Navigation modules must not be installed in a location where they will be exposed to extreme  

temperatures including, but not limited to, installation on top of a vehicles radio, transmission tunnel or firewall. 

 

Damaged caused by exposure to heat is not covered under warranty.  

•  If a navigation product is being installed, the end user will need access to the SD Card so as to perform navigation 

software updates. Please ensure the navigation module is installed in an easy to access location. 

•  If the Navigation SD card is not easily accessible by the end user, you the seller, will be responsible for any labour to 

assist the customer to access the SD card to perform navigation updates. 

Important Product Information

Overview

PLEASE READ BEFORE BEGINNING INSTALLATION

Installation Terms & Conditions

1319-1_INS_V1.0

This GM Caravan/Trailer Camera System is designed for 2015 on Chevrolet Silverado (MyLink), GMC Sierra (Intellilink) 

or Cadillac Escalade (My CUE) systems that have an 8 Inch Touch screen. It integrates a Caravan/Trailer Camera into 
the factory screen and includes the functionality to view the Caravan/Trailer Camera automatically when reverse gear 
is engaged.

This manual is a guide to installing the Caravan/Trailer Camera System.

• 

This product comes with a 2 year warranty against manufacturer related defects

•  Please Note: 

This system is only compatible with NTSC Cameras. So for all additional cameras (E.G. Caravan/Trailer) 

ensure you only use an NTSC camera.

Summary of Contents for 1319-1








Reviews: