manualshive.com logo in svg

Alpine INE-S920E, Owner'S Manual

The Alpine INE-S920E is a cutting-edge car multimedia system designed for superior performance. Unlock the full potential of this remarkable device with the comprehensive Owner's Manual, which can be easily downloaded for free at manualshive.com, providing users with a detailed guide to maximize their enjoyment and convenience.

Share
Download
background image

63

-EN

01GB05INE-S920E.fm

ALPINE INE-S920E/INE-Z928E 68-21057Z31-A (EN)

Operating Auxiliary Devices (Optional)

To operate devices connected to the AUX terminals of INE-S920E/INE-
Z928E, follow the procedure described below.

•

Set AUX In to “On.” Refer to “Setting the AUX Mode” (page 50).

•

Depending on the connected unit, the onscreen buttons may not 
work, or their operation may differ.

•

If you try to activate the auxiliary device while driving, the display 
will show the warning-Picture off for your safety.

1

Press the 

 (AUDIO) button

.

2

Touch 

[AUX1]

*

1

, 

[AUX2]

*

1

 or 

[AUX3]

*

2

 of Top 

banner.

The AUX mode screen is displayed.

*

1

The name which is given as the mode name in “Setting the Primary 
AUX Name (AUX Setup)” (page 50) and “Setting the Secondary AUX 
Name” (page 50) is displayed.

*

2

When “Setting the AUX3” (page 51), AUX3 appears when setting 
”AUX” only.

AUX Operation Screen Display During Video File 
Playback

Touch the screen.

The AUX operation screen is displayed.

Example for AUX1, AUX2, AUX3, DVD, Game mode 
display

•

The operation screen changes to the visual screen in the AUX 
mode for 5 seconds after an operation has been performed. To 
hide the AUX operation screen, touch the video display area.

Touch the display panel to display the operation screen 
again.

•

Setting the AUX name for EXT.DVD, DVD-CHG, DVB-T, and TV 
mode displays their individual operation switches and enables 
operation. Refer to “Setting the Primary AUX Name (AUX Setup)” 
(page 50) and “Setting the Secondary AUX Name” (page 50).

Operating an External DVD Player

To operate an External DVD player (Optional), set “Setting the Primary 
AUX Name (AUX Setup)” (page 50) or “Setting the Secondary AUX 
Name” (page 50) to “EXT.DVD.”

1

Press the 

 (AUDIO) button

.

2

Touch 

[EXT.DVD]

 of Top banner.

The display shows the EXT. DVD mode screen.

Auxiliary Device 
(Optional)

WARNING

It is dangerous (and illegal in many states) for the 
driver to watch TV/video while driving the vehicle. The 
driver may be distracted from looking ahead and an 
accident could occur.

Install the INE-S920E/INE-Z928E correctly so that the 
driver cannot watch TV/video unless the vehicle is 
stopped and the emergency brake is applied. 

If the INE-S920E/INE-Z928E is not installed correctly, 
the driver will be able to watch TV/video while driving 
the vehicle and may be distracted from looking ahead 
and cause an accident. The driver or other people 
could be severely injured.

Change to the External DVD Mode

01GB00INE-S920E.book  Page 63  Tuesday, June 12, 2012  10:56 AM

Summary of Contents for INE-S920E





























































































































































































Reviews:

No comments

Related manuals for INE-S920E

Clatronic AR 829 DVD Instruction Manual preview
AR 829 DVD
Brand: Clatronic Pages: 38
Ebinger LEADER 25 Instruction Booklet preview
LEADER 25
Brand: Ebinger Pages: 48
VAG-Navisystems NaviTouch Android Assembly Instructions Manual preview
NaviTouch Android
Brand: VAG-Navisystems Pages: 12
Nelson Traveling Sprinkler Assembly And Operating Instructions Manual preview
Traveling Sprinkler
Brand: Nelson Pages: 16
Solem LR-IP Quick Installation Manual preview
LR-IP
Brand: Solem Pages: 18
Viking VK531 Technical Data preview
VK531
Brand: Viking Pages: 5
Viking VK510 Technical Data Manual preview
VK510
Brand: Viking Pages: 7
Xomax MB-01EU User Manual preview
MB-01EU
Brand: Xomax Pages: 29
Somogyi voxbox vb 2000 Instruction Manual preview
voxbox vb 2000
Brand: Somogyi Pages: 46
AQUAJOE SJI-TLS20 Quick Manual preview
SJI-TLS20
Brand: AQUAJOE Pages: 16
Gardena 8203 Operating Instructions Manual preview
8203
Brand: Gardena Pages: 24
Task Force Tips MASTER FOAM Instructions For Safe Operation And Maintenance preview
MASTER FOAM
Brand: Task Force Tips Pages: 12
Toyota Prius Navi User Manual preview
Prius Navi
Brand: Toyota Pages: 17
Clarion NX504E Installation Manual preview
NX504E
Brand: Clarion Pages: 7
Fiat BLUE&ME 2014 Owner'S Manual Supplement preview
BLUE&ME 2014
Brand: Fiat Pages: 130
Fiat Connect Nav+ User Manual preview
Connect Nav+
Brand: Fiat Pages: 166
RCA DRC6289 User Manual preview
DRC6289
Brand: RCA Pages: 14
RCA DRC96100 User Manual preview
DRC96100
Brand: RCA Pages: 16

Brands by name

Popular brands

Load more brands