24
-EN
01GB04INE-S920E.fm
ALPINE INE-S920E/INE-Z928E 68-21057Z31-A (EN)
You can configure the audio settings by car type.
Touch
[i-Personalize]
.
The i-Personalize Setup screen is displayed.
Car Specific Sound Setup
You can set and reproduce the best audio environment for the
environment in your car.
1
Touch
[Car Specific Sound Setup]
.
The vehicle type selection screen is displayed.
2
Touch the relevant Vehicle type.
•
The selected Vehicle type is reflected in the “i-Personalize”
symbol on My Favorites screen.
3
Touch the position of the driver’s seat.
4
Touch the size of the front speaker.
5
Select whether or not there is a tweeter.
6
Select the installation position of the rear speaker.
If you select “No rear speaker,” you cannot adjust the rear
speaker in Fader/Time Correction/X-OVER in sound setup.
7
Select whether or not there is a subwoofer.
If you select “No,” you cannot adjust the subwoofer level/
subwoofer phase in sound setup.
8
Select the material of the car seats.
The settings confirmation screen is displayed.
•
If the car seats are made of both leather and fabric, select
[Half
leather]
.
9
Check the settings and touch
[OK]
.
•
If Preset3 was already saved for Time Correction/X-OVER/
Parametric EQ, the data will be overwritten.
•
The Easy sound settings are reflected in the following Audio Setup
items.
Setting the MX (Media Xpander)
-
Adjusting the Parametric Equalizer Curve (Parametric EQ)
Adjusting the Time Correction (Time Correction)
Adjusting the Crossover Settings (X-OVER)
(
only when
Subwoofer is set to [On]
)
The Equalizer Presets (Bass Max EQ) settings are disabled.
Downloaded Sound Settings
Using a USB memory device, the sound settings downloaded from the
ALPINE website can be used to configure Time Correction, X-OVER
and Parametric EQ settings.
Setting item: Downloaded Sound Settings
The file name of download data shall be “A_U
*****
.MP3.”
•
Save the setting data in the root folder.
•
For details about procedures of download, see ALPINE’s web site.
1
Touch
[Downloaded Sound Settings]
.
Setting data files are displayed in a list with a maximum of 5
items.
2
Touch the desired file.
3
Touch
[OK]
.
The downloaded setting values are set as the Time
Correction/X-OVER/Parametric EQ settings, and at the
same time saved as Preset3, respectively.
•
When no USB memory is connected, the “iPersonalize Setting”
function is not available.
•
If Preset3 was already saved for Time Correction/X-OVER/
Parametric EQ, the data will be overwritten.
i-Personalize Setup
Extender (fixed)
Identifier (alphabet or number
5 letters maximum)
Header (fixed)
01GB00INE-S920E.book Page 24 Tuesday, June 12, 2012 10:56 AM
