Alpine INE-S920E Owner'S Manual Download

Page: 56 / 188

-EN

01GB04INE-S920E.fm

ALPINE INE-S920E/INE-Z928E 68-21057Z31-A (EN)

AUX Camera Setting

[AUX Camera]

is selected on the Camera setup menu in step 3.

Refer to “Camera Setup Operation” (page 54).

Setting item: Camera Select/ / Camera Signal

/Guide

Adjustment

Setting contents: Off (Initial setting) / Rear

/ OTHER

If “Camera Select” is set to “Off”, this option is not available.

If “Camera Select” in Direct Camera Setting is set to “Rear,”
“Rear” cannot be set in AUX Camera Setting.

Setting the AUX Camera Signal Input

When the AUX camera is connected, the video input signal type can be
chosen.

Further setting item: Camera Signal

Setting contents: NTSC (Initial setting) / PAL

Adjusting the Rear Camera Guide

If you select “Rear” you can adjust the camera guide position.

Setting item: Guide Adjustment

Touch

[Guide Adjustment]

The camera guide adjustment screen is displayed.

Touch

[Adjust]

•

[Adjust]

does not appear, proceed to step 3.

Touch the guide you intend to adjust.

Guide line can also be selected by touching

[

]

[

]

Touch

[

]

[

]

[

]

[

]

to adjust the position

of the guide.

•

Touching

[Clear]

clears adjustments and returns to the setting

before guide line alteration.

After the adjustment is completed, touch

[Set]

Adjusting guides simultaneously (for Rear camera
only)

Touch

[Link]

The 3 vertical guides of the currently-selected guide link
together, allowing them to be adjusted simultaneously.

Turning guide display ON/OFF

Turning the selected guide off.

Touch

[ON/OFF]

The currently selected guide will turn off.

To turn the guide on, touch

[ON/OFF]

again.

•

Guides that are turned off are still adjustable.

Returning guides to default.

Touch

[Default]

A message window will appear.

Touch

[OK]

Adjusted values will return to default settings.

Camera Interrupt Setting (Power OFF
Mode)

[Camera Interrupt]

is selected on the Camera setup menu in step 3.

Refer to “Camera Setup Operation” (page 54).
You can set whether to display the rear camera image when the gear
lever is moved to the reverse (R) position while the unit is turned off.

Setting item: Camera Interrupt (Power OFF Mode)
Setting contents: On (Initial setting) /Off

Setting the Camera Input

Rear:

Rear camera

OTHER:

Side camera, Room camera, etc.

On:

The rear camera image is displayed

Off:

The rear camera image is not displayed

01GB00INE-S920E.book Page 56 Tuesday, June 12, 2012 10:56 AM

Summary of Contents for INE-S920E





























































































































































































Search results

Summary of Contents for INE-S920E

Reviews:

Related manuals for INE-S920E

Brands by name

Popular brands

Alpine INE-S920E, Owner'S Manual

Search results

Summary of Contents for INE-S920E

Reviews:

Related manuals for INE-S920E

Brands by name

Popular brands