Alpine INE-S920E Owner'S Manual Download

Page: 55 / 188

-EN

01GB04INE-S920E.fm

ALPINE INE-S920E/INE-Z928E 68-21057Z31-A (EN)

Direct Camera Setting

[Direct Camera]

is selected on the Camera setup menu in step 3.

Refer to “Camera Setup Operation” (page 54).

Setting item: Camera Select/ Guide Adjustment

Setting contents: Off (Initial setting) / Front / Rear

If “Camera Select” is set to “Off”, this option is not available.

If “Camera Select” in AUX Camera Setting is set to “Rear,” “Rear”
cannot be set in Direct Camera Setting.

Switching video patterns for Rear camera & Front
camera

The video pattern can be changed when connected to HCE-C200R/
HCE-C200F/HCE-C210RD/HCE-C212F.

Setting item: Guide Adjustment

Touch

[Guide Adjustment]

The camera guide adjustment screen is displayed.

Touch

[Back]

[Panorama]

[Corner]

, or

[Top]

The view will change to the selected view.

•

[Back]

will not appear for the Front camera.

Touch

[

]

to return to the previous screen.

•

For an explanation of video patterns, see the camera Owner's
Manual.

Adjusting the Rear/Front Camera Guide

If you select “Rear” or “Front,” you can adjust the camera guide
position.

Setting item: Guide Adjustment

Touch

[Guide Adjustment]

The camera guide adjustment screen is displayed.

•

If the video pattern is set to “Corner,” the camera guide will not
be displayed.

Touch

[Adjust]

•

[Adjust]

does not appear, proceed to step 3.

Touch the guide you intend to adjust.

Guide line can also be selected by touching

[

]

[

]

Display example for rear camera mode

Display example for front camera mode

Touch

[

]

[

]

[

]

[

]

to adjust the position

of the guide.

•

Touching

[Clear]

clears adjustments and returns to the setting

before guide line alteration.

After the adjustment is completed, touch

[Set]

Adjusting guides simultaneously (for Rear camera
only)

Touch

[Link]

The 3 vertical guides of the currently-selected guide link
together, allowing them to be adjusted simultaneously.

Turning guide display ON/OFF

Turning the selected guide off.

Touch

[ON/OFF]

The currently selected guide will turn off.

To turn the guide on, touch

[ON/OFF]

again.

•

Guides that are turned off are still adjustable.

Returning guides to default.

Touch

[Default]

A message window will appear.

Touch

[OK]

Adjusted values will return to default settings.

Setting the Camera Input

Rear:

Rear camera

Front:

Front camera

01GB00INE-S920E.book Page 55 Tuesday, June 12, 2012 10:56 AM

Summary of Contents for INE-S920E





























































































































































































Search results

Summary of Contents for INE-S920E

Reviews:

Related manuals for INE-S920E

Brands by name

Popular brands

Alpine INE-S920E, Owner'S Manual

Search results

Summary of Contents for INE-S920E

Reviews:

Related manuals for INE-S920E

Brands by name

Popular brands