Alpine INE-S920E Owner'S Manual Download

Page: 91 / 188

-EN

01GB06INE-S920E.fm

ALPINE INE-S920E/INE-Z928E 68-21057Z31-A (EN)

For INE-S920E

Remove the mounting sleeve from the main unit (see
“Removal” on page 91).
Slide the unit into the mounting sleeve and secure it.

If the installed mounting sleeve is loose in the dashboard, the
pressure plates may be bent slightly to remedy the problem.

The supplied face plate may be mounted.

Reinforce the head unit with the metal mounting
strap (not supplied). Secure the ground lead of the
unit to a clean metal spot using a screw (

) already

attached to the vehicle’s chassis. Connect all the
leads of the INE-S920E according to details
described in the CONNECTION section.

•

For the screw marked “*2,” use an appropriate screw for the chosen
mounting location.

Slide the INE-S920E into the dashboard until it
clicks. This ensures that the unit is properly locked
and will not accidentally come out from the
dashboard.

Removal

1. Insert the bracket keys into the unit, along the guides

on either side. The unit can now be removed from the
mounting sleeve.

2. Pull the unit out, keeping it unlocked as you do so.

<JAPANESE CAR>

Take the face plate off, and secure the ground lead of the unit to
a clean metal spot using a screw (

) already attached to the

car’s chassis.
Attach the Original Mounting Bracket to each side of the
INE-S920E/INE-Z928E, using the screws supplied with INE-
S920E/INE-Z928E.

Mounting Sleeve
(Included)

Dashboard

Face Plate

(Included)

This unit

Pressure

Plates

Hex Nut (M5)

Screw

Bolt Stud

This unit

Chassis

Ground Lead

Metal
Mounting
Strap

This unit

Bracket keys
(Included)

Ground Lead

Chassis

Screws (M5 × 8) (Included)

Face Plate (Included)

Mounting
Bracket

01GB00INE-S920E.book Page 91 Tuesday, June 12, 2012 10:56 AM

Summary of Contents for INE-S920E





























































































































































































Search results

Summary of Contents for INE-S920E

Reviews:

Related manuals for INE-S920E

Brands by name

Popular brands

Alpine INE-S920E, Owner'S Manual

Search results

Summary of Contents for INE-S920E

Reviews:

Related manuals for INE-S920E

Brands by name

Popular brands