43
-EN
01GB04INE-S920E.fm
ALPINE INE-S920E/INE-Z928E 68-21057Z31-A (EN)
MX Compress Media
This corrects information that was omitted at the time of
compression. This reproduces a well-balanced sound close to
the original.
MX AUX/AUX3
Choose the MX mode (Compress Media, Movie, or Music) that
corresponds to the media connected.
•
To cancel MX mode for all music applications, set MX to “Off” in
step 1.
•
Each music applications, such as FM radio, CD, and MP3/WMA/
AAC can have its own MX setting.
•
Setting to MX sets MX mode of each music applications to “Off.”
•
There is no MX mode for MW, LW radio.
•
The function is inoperable when Defeat is set to “On.”
Equalizer Presets (Bass Max EQ)
[Bass Max EQ]
is selected on the Audio setup menu in step 3. Refer to
“Sound Setup Operation” (page 41).
10 typical equalizer settings are preset at the factory for a variety of
musical source material.
Setting item: Bass Max EQ
Setting contents: FLAT (Initial setting) / POPS / ROCK / NEWS /
JAZZ / ELECTRICAL DANCE / HIP HOP / EASY
LISTENING / COUNTRY / CLASSICAL
•
Only one type can be set to ON.
•
When Bass Max EQ setting is edited, a Download Sound setting is
disabled.
•
When Bass Max EQ is set, the interlinked Parametric EQ settings are
also changed. We recommend storing Parametric EQ settings in the
Preset in advance.
•
The Bass Max EQ setting can be configured when Defeat is “Off.”
Adjusting the Parametric Equalizer
Curve (Parametric EQ)
[Parametric EQ]
is selected on the Audio setup menu in step 3. Refer
to “Sound Setup Operation” (page 41).
You can modify the Equalizer settings to create a response curve more
appealing to your personal taste.
Setting item: Parametric EQ
1
Adjust the Parametric EQ to your preference.
Adjusting the Band
Touch
[Band]
to select the band to be adjusted.
•
You can select a band directly by touching the screen.
Adjusting the Frequency
Touch
[
]
or
[
]
of “Freq.” to adjust the frequency of the
selected band.
Adjustable frequency bands: 20 Hz to 20 kHz (in 1/3 octave steps)
Adjusting the Level
Touch
[
]
or
[
]
of “Level” to adjust the level of selected
band.
Setting contents: -7 to +7 (Initial setting: 0)
Setting the Bandwidth
Touch
[
]
or
[
]
of “Q Adjust” to select the bandwidth.
Setting contents: 1 (Initial setting) / 2 / 3
2
To adjust another band, repeat step 1, and adjust all
bands.
3
To store the adjusted setting value, touch and hold
[Preset1]
,
[Preset2]
, or
[Preset3]
for at least 2
seconds.
•
Settings exceeding the frequency of adjacent bands are not available.
•
While adjusting the Parametric EQ, you should consider the
frequency response of the connected speakers.
•
When the parametric EQ is adjusted, the adjustment for Bass Max
EQ becomes ineffective.
•
When Bass Max EQ is set, the interlinked Parametric EQ settings are
also changed. We recommend storing Parametric EQ settings in the
Preset in advance.
•
Touch
[Flat]
to initialise all values.
•
The Parametric EQ setting can be configured when Defeat is “Off.”
Calling the Parametric EQ adjusted value
Calling the pre-set Parametric EQ adjusted value.
Touch
[Preset1]
,
[Preset2]
, or
[Preset3]
on the
Parametric EQ screen.
The setting stored in the Preset will be recalled.
Band1
Band2
···
Band8
Band9
Band1:
20 Hz~100 Hz (63 Hz)
Band2:
63 Hz~315 Hz (125 Hz)
Band3:
125 Hz~500Hz (250 Hz)
Band4:
250 Hz~1 kHz (500Hz)
Band5:
500 Hz~2 kHz (1 kHz)
Band6:
1 kHz~4 kHz (2 kHz)
Band7:
2 kHz~7.2 kHz (4 kHz)
Band8:
5.8 kHz~12 kHz (8 kHz)
Band9:
9 kHz~20 kHz (16 kHz)
01GB00INE-S920E.book Page 43 Tuesday, June 12, 2012 10:56 AM
