Cleaning optical components
248
Goldeye G/CL Technical Manual V4.2.0
Cleaning instructions
Carry out all cleaning operations (on lenses, optical filter, and sensor) in a
clean
dust-free room
. The optical components are very fragile. Therefore, you must not
touch them with your fingers or any hard material.
Damage to the sensor possible if no protection is present
Removing the lens or dust cap on these cameras immediately exposes the sensor.
Always ensure that you are not inadvertently damaging the sensor surface.
Figure 80: Camera mount without filter, directly exposing the sensor
Using improper cleaning materials may damage filter and sensor surfaces
•
Never wipe lenses with dry swabs or tissue as this may cause scratches.
•
As a cleaning tool, use only lens cleaning tabs or a lens cleaning tissue wrapped
around a small piece of plastic. The lens cleaning tissue must be chemically
pure and free from silicones or other additives.
•
Do not use metal tools.
•
Do not use any disposable cotton cosmetic swabs; they may contain
contaminants.
•
Do not use cosmetic cotton.
•
Do not use consumer eyeglass cleaning cloths pretreated with silicone.
•
Do not use fibrous material that may get caught in small gaps.
•
As cleaning liquid, use only isopropyl alcohol.
•
Never use aggressive cleaners like benzine or spirits. Using cleaners like that
may damage the surface.
Optical cleaning liquid material safety data sheets
Read the material safety data sheet (MSDS) for the optical cleaning liquid before
cleaning your camera and optics. The MSDS provides important information
including hazard identification, first aid measures, handling and storage, and PPE.
