Specifications
130
Goldeye G/CL Technical Manual V4.2.0
Output
GPIOs
Gain factor (Gain 2)
45
A/D converter
14-bit
Image buffer size
256 MB
Stream hold capacity
392 frames at full resolution
Parameter
Values
Digital interface
GigE Vision (based on IEEE 802.3 1000BASE-T)
Bit depth
8-bit, 12-bit, 14-bit
Pixel formats
Mono 8, Mono 12, Mono 12Packed, Mono 14
Table 81: Goldeye G-033 TECless output
Parameter
Values
Opto-isolated I/Os
1 input, 2 outputs
RS232
up to 115,200 bits per second, 8N1 (adjustable)
LVTTL I/Os
1 input, 1 output
Table 82: Goldeye G-033 TECless GPIOs
Parameter
Values
1
Typical values that are determined similar to EMVA 1288 under 1200 nm LED illumination. Given values are mean
values of multiple different measurements at +45 °C FPA temperature, if not stated otherwise.
2
Measured with CDS delay of 12 µs.
3
Maximum exposure value given is valid for Gain0 and sensor temperature of +45°C. Even longer exposures can be
set, but the image quality may deteriorate.
Table 80: Goldeye G-033 TECless imaging and performance (sheet 2 of 2)
