Specifications
97
Goldeye G/CL Technical Manual V4.2.0
Output
GPIO
Gain factor (Gain 2)
45
A/D converter
14-bit
Image buffer size
256 MB
Stream hold capacity
392 frames at full resolution
Parameter
Values
Digital interface
Camera Link Base, up to 2 taps, 85 MHz, SDR-26 connector,
Serial Control Channel
Bit depth
8-bit, 12-bit, 14-bit
Pixel formats
•
Tap geometry 1X 1Y: Mono 8, Mono 12, Mono 14
•
Tap geometry 1X2 1Y: Mono 8, Mono 12
Table 39: Goldeye CL-033 TECless output
Parameter
Values
Opto-isolated I/Os
1 input, 2 outputs
RS232
up to 115,200 bits per second, 8N1 (adjustable)
LVTTL I/Os
1 input, 1 output
LVDS inputs
CC1 - CC4
Table 40: Goldeye CL-033 TECless GPIOs
Parameter
Values
1
Typical values that are determined similar to EMVA 1288 under 1200 nm LED illumination. Given values are mean
values of multiple different measurements at +45 °C FPA temperature, if not stated otherwise.
2
Measured with CDS delay of 12 µs.
3
Maximum exposure value given is valid for Gain0 and sensor temperature of +45°C. Even longer exposures can be
set, but the image quality may deteriorate.
Table 38: Goldeye CL-033 TECless imaging and performance (sheet 2 of 2)
