Triggering
203
Goldeye G/CL Technical Manual V4.2.0
Goldeye G/CL isolated input delay and minimum pulse
width
The minimum pulse width for all Goldeye G/CL cameras is:
Test conditions
The input signal was driven with 3.3 V (LVTTL) and no external additional series
resistor was used.
CC1 - CC4 (Camera Link only)
The Camera Link signals CC1 - CC4 are LVDS (Low-voltage differential signaling)
pairs and are located on the SDR-26 connector. They are exclusively controlled by
the frame grabber the camera is connected to. For further information refer to the
Camera Link standard.
Figure 59: Goldeye G/CL minimum pulse width
I
F
0
t
44 μs
6 μs 20 kHz
