manualshive.com logo in svg

Allen-Bradley armorstratix 5700, User Manual, Page: 311 / 458

Share
Download
Allen-Bradley armorstratix 5700 User Manual Download Page 311

Rockwell Automation Publication 1783-UM007I-EN-P - December 2017

311

Monitor the Switch

   Chapter 4

From the Private to Public Translations dialog box for an instance, you can 
view a list of IP addresses that have been changed by NAT within the last 90 
seconds.

Table 117 - NAT Diagnostics per Instance 

Field

Description

Current Active Translations

Displays the number of translations that have occurred within the last 90 seconds across all NAT instances.

Total NAT Translated Packets

Displays the total number of packets that have been translated for this instance.

Total Private to Public Address Translations

Displays the total number of private-to-public translations for this instance.

Total Public to Private Address Translations

Displays the total number of public-to-private translations for this instance.

ARP Fixup

Displays the number of ARP packets that have been fixed up for this instance.

ICMP Fixup

Displays the number of ICMP packets that have been fixed up for this instance.

Total Fixups

Displays the number of ARP and ICMP packets that have been fixed up for this instance.

Incoming Non Translated Traffic (Pass-Through)

Displays the number of incoming packets with untranslated traffic that NAT passed through for this instance.

Outgoing Non Translated Traffic (Blocked)

Displays the number of outgoing packets with untranslated traffic that NAT blocked for this instance.

Incoming Multicast Traffic (Blocked)

Displays the number of incoming packets with multicast traffic that NAT blocked for this instance.

Outgoing Multicast Traffic (Pass-Through)

Displays the number of outgoing packets of multicast traffic that NAT passed through for this instance.

Incoming IGMP Traffic (Blocked)

Displays the number of incoming packets with IGMP traffic that NAT blocked for this instance.

Outgoing IGMP Traffic (Blocked)

Displays the number of outgoing packets with IGMP traffic that NAT blocked for this instance.

Private to Public Translations

Click to view private-to-public translation diagnostics for the instance. See 

Table 118

.

Public to Private Translations

Click to view public-to-private translation diagnostics for the instance. See 

Table 119

.

Table 118 - Private-to-Public Translation Diagnostics

Field

Description

Private

Displays the existing address for a device on the private subnet.

Public

Displays a unique public address that represents the corresponding device on the private subnet.

Subnet

Indicates whether the translation is part of a Subnet entry type. 

Number of Packets

Displays the number of packets that contain the translation.

Summary of Contents for armorstratix 5700











































































































































































































































































































































































































































































Reviews:

No comments