Allen-Bradley armorstratix 5700, User Manual, Page: 289 / 458

Rockwell Automation Publication 1783-UM007I-EN-P - December 2017 289
Monitor the Switch Chapter 4
Stratix 5400 Front Panel
Along with the View modes on the Dashboard page, the Stratix 5400 switch
has a Display Mode button on the physical switch. The Display Mode button
changes the behavior of the port status indicators. Select a mode by pressing the
Display Mode button on the physical switch. Each time that you press the
switch, the active mode moves from the default Status mode to Speed, Duplex,
PRP, and PoE respectively, and then back to Status mode. For a description of
the modes, see
Table 104 .
When a mode is active, its mode status indicator turns on. When a mode is
inactive, its mode status indicator turns off. When all status indicators for
Speed, Duplex, PRP, DLR, and PoE are off, the switch is in the default Status
mode.
Figure 52 - Stratix 5400 Display Modes
Display Mode Button
Display Modes