Allen-Bradley armorstratix 5700, User Manual, Page: 247 / 458

Rockwell Automation Publication 1783-UM007I-EN-P - December 2017 247
Configure Switch Features Chapter 3
Table 95 - CLI Commands to Enable PROFINET
Command Description
Step 1 profinet Enables PROFINET on the switch.
Step 2 profinet id [PROFINET device name] Sets the PROFINET device identifier (ID).
IMPORTANT: This ID must match the PROFINET device name you specified for the switch in your controller project.
The maximum length is 240 characters. The only special characters allowed are the period (.) and hyphen (-), and they are
allowed only in specific positions within the ID string. It can have multiple labels within the string. Each label can be from
1 to 63 characters, and labels must be separated by a period (.). The final character in the string must not be zero (0).
For more details about configuring the PROFINET ID, see the PROFINET specification, document number TC2-06-0007a,
filename PN-AL-protocol_2722_V22_Oct07, available from
PROFIBUS .
Step 3 profinet vlan [vlan id] (Optional). Changes the VLAN number. The default VLAN number is 1. The VLAN ID range is 1…4094.
Step 4 end Returns to privileged EXEC mode.
Step 5 show running-config Verifies your entries.
Step 6 copy running-config startup-config (Optional). Saves your entries in the configuration file.
Example