Allen-Bradley armorstratix 5700, User Manual, Page: 115 / 458

Rockwell Automation Publication 1783-UM007I-EN-P - December 2017 115
Configure Switch Features Chapter 3
Configure DLR via Device Manager
To configure DLR, follow these steps.
1.
From the Configure menu, choose DLR.
2.
(Stratix 5400 switches only). From the DLR Ring ID pull-down menu,
choose the ring to configure.
3.
To configure the switch as a ring node or a ring supervisor, complete the
fields on the Config DLR tab as described in
Table 39 on page 116 .
4.
To configure DHCP for ring devices, complete the fields on the
Configure DHCP tab as described in
Table 40 on page 117 and click
Submit.
•
To add an entry to the DLR DHCP configuration table, click Add
Entry.
•
To add a range of entries, click Add Range.
•
To edit an existing entry, select it in the table and click Edit.
•
To delete an entry, select it and click Delete.
New rows are added to the end of the table. To change the position of a
row (Index), select it and click Move to specify a different row number,
or use the up and down arrows.
IMPORTANT Be sure to configure DLR on the switch prior to connecting ring ports.
Connecting both ring ports on a switch that has not been configured for DLR
can result in undesired behavior and limit the ability to configure the switch.