Rockwell Automation Publication 22C-UM001J-EN-E - January 2017
105
Programming and Parameters
Chapter 3
d319 [Testpoint Data]
The present value of the function selected in A196 [Testpoint Sel].
Values
Default:
Read Only
Min/Max:
0/FFFF
Display:
1 Hex
d320 [Control SW Ver]
Main Control Board software version.
Values
Default:
Read Only
Min/Max:
1.00/99.99
Display:
0.01
d321 [Drive Type]
Used by Rockwell Automation field service personnel.
d322 [Output Speed]
Related Parameter(s):
Displays current output frequency in percent (%). The scale is 0% at 0.00 Hz to 100.0% at
[Maximum Freq].
Values
Default:
Read Only
Min/Max:
0.0/100.0%
Display:
0.1%
d323 [Output RPM]
Displays current output frequency in RPM. The scale is based on
[Motor NP Poles].
Values
Default:
Read Only
Min/Max:
0/24000 RPM
Display:
1 RPM
d324 [Fault Frequency]
Related Parameter(s):
Displays the value of
[Output Freq] when the last fault occurred.
Values
Default:
Read Only
Min/Max:
0.00/320.00 Hz
Display:
0.01 Hz
d325 [Fault Current]
Related Parameter(s):
Displays the value of
[Output Current] when the last fault occurred.
Values
Default:
Read Only
Min/Max:
0.0/(Drive Rated Amps × 2)
Display:
0.1 Amps
d326 [Fault Bus Volts]
Related Parameter(s):
Displays the value of
[DC Bus Voltage] when the last fault occurred.
Values
Default:
Read Only
Min/Max:
0/820 VDC
Display:
1 VDC
