Rockwell Automation Publication 22C-UM001J-EN-E - January 2017
181
Metasys N2
Appendix F
Using Metasys Configurable
Objects to Access Parameters
Configurable objects are inputs and outputs that let you read and write
parameter values. These objects handle only 16-bit parameter values.
Reading Parameter Values
The configurable points may show any parameter in the drive by configuring
the Param# for INx point. The drive reads the value of the parameter
configured in the Param# for INx point and shows the result in the User INx
point. The Param# for INx’s default to commonly accessed parameters and can
be changed if desired. A “0” disables the fetching of data and a “0” is returned
in the respective User INx. See
Figure 44 - Configurable Input Point Operation Objects Inputs
Table 46 - Configurable Objects: Inputs
Network Point
Name
Description
Default
Type
(NPT)
Address
(NPA)
AI
10
User IN1
User-defined Input 1
0
AI
11
User IN2
User-defined Input 2
0
AI
12
User IN3
User-defined Input 3
0
AI
13
User IN4
User-defined Input 4
0
ADI
1
Param# for IN1
User IN1 (AI 10)
Data Source (Param#)
b001 [Output Freq] (Hz)
ADI
2
Param# for IN2
User IN2 (AI 11)
Data Source (Param#)
b011 [Elapsed MWh]
ADI
3
Param# for IN3
User IN3 (AI 12)
Data Source (Param#)
b012 [Elapsed Run Time]
ADI
4
Param# for IN4
User IN4 (AI 13)
Data Source (Param#)
b014 [Drive Temp]
Controller
Drive
Param#
for INx
User INx
ADI
AI
Request
Response Data
