66
Rockwell Automation Publication 1756-UM010C-EN-P - June 2021
Chapter 4 Install the Configurable Flowmeter Module
2. Press quickly and evenly to seat the RTB on the module until the latches
snap into place.
3. Slide the locking tab down to lock the RTB onto the module.
Removing the Removable
Terminal Block from the
Module
Before removing the module, you must remove the RTB.
1. Unlock the locking tab at the top of the module.
Locking tab
WARNING:
When you connect or disconnect the removable terminal block
(RTB) with field side power applied, an electrical arc can occur. This could
cause an explosion in hazardous location installations.
Be sure that power is removed or the area is nonhazardous before
proceeding.
