114
Rockwell Automation Publication 1756-UM010C-EN-P - June 2021
Appendix B Software Configuration Tags
I.Status[1].TotalCounts
Decimal
DINT
Displays actual pulses counted by the counter connected to the channel
1
I.Status[1].FreqAverage
Float
REAL
Displays frequency averaged over the Meter samples on channel 1
I.Status[1].FreqPeriod
Float
REAL
Displays frequency using sample time on channel 1
I.Status[1].Speed
Float
REAL
Displays frequency using filter resolution on channel 1
I.Status[1].Acceleration
Float
REAL
Displays acceleration on channel 1 as calculated by using
AccelCalculation samples
I.Status[1].FillTotal
Float
REAL
Fill total in engineering units
I.Status[1].GrossVolume
Float
REAL
Total Counts during each Sample/K-factor x Meter Factor as
occurs on channel 1
I.Status[1].NetVolume
Float
REAL
Total Counts during each Sample/K-factor x MeterFactor x CCF) as
occurs on channel 1
I.Status[1].GrossRate
Float
REAL
Total Counts in Meter Sample/ (K-factor x Sample Interval) x Meter
Factor as occurs on channel 1
I.Status[1].NetRate
Float
REAL
Total Counts in Meter Sample/ (K-factor x Sample Interval) x Meter
Factor x CCF as occurs on channel 1
I.Status[1].ProverTotal
Float
REAL
Displays total counts received on channel 1 in prover operation.
Total resets when the ProverEnable feature is enabled.
This value operates concurrently with NetVolume, and must be saved if
subtracted from the NetVolume for single and multiple prover
verifications.
I.CSTTimestamp[0]
Decimal
DINT
I.CSTTimestamp[1]
Decimal
DINT
Table 15 - Configurable Flowmeter Module Input Tags
Name
Style
Data Type
Definition
