Allen-Bradley 1756-CFM, User Manual

Page: 113 / 150

Rockwell Automation Publication 1756-UM010C-EN-P - June 2021 113
Appendix B Software Configuration Tags
I.Status[0].ProverState Decimal SINT
Displays status of the prover operation on channel 0
0 = Prover Not Active
1 = Prover waiting for 1
st
start
2 = Prover waiting for 1
st
stop
3 = Prover waiting for 2
nd
start
4 = Prover waiting for 2
nd
stop
5 = Prover Complete
I.Status[0].FillState Decimal SINT
Displays current state of module for channel 0. These states are
possible:
0 = Filler not active
1 = Filler Enabled only, waiting for start
2 = Timed Trickle Flow complete, not filled
3 = Full Flow for Fill function
4 = Timed Trickle Flow for Fill function
5 = Engineering units for Full Flow
6 = Engineering units for Trickle Flow
7 = Fill complete
I.Status[0].ConsumerErrorCode Decimal INT See Using Error Codes on page 105
I.Status[0].TotalCounts Decimal DINT
Displays actual pulses counted by the counter connected to the channel
0
I.Status[0].FreqAverage Float REAL Displays frequency averaged over the Meter samples on channel 0
I.Status[0].FreqPeriod Float REAL Displays frequency using sample time on channel 0
I.Status[0].Speed Float REAL Displays frequency using filter resolution on channel 0
I.Status[0].Acceleration Float REAL
Displays acceleration on channel 0 as calculated by using
AccelCalculation samples
I.Status[0].FillTotal Float REAL Fill total in engineering units
I.Status[0].GrossVolume Float REAL
 Total Counts during each Sample/K-factor x Meter Factor as
occurs on channel 0
I.Status[0].NetVolume Float REAL
 Total Counts during each Sample/K-factor x MeterFactor x CCF) as
occurs on channel 0
I.Status[0].GrossRate Float REAL
 Total Counts in Meter Sample/ (K-factor x Sample Interval) x Meter
Factor as occurs on channel 0
I.Status[0].NetRate Float REAL
 Total Counts in Meter Sample/ (K-factor x Sample Interval) x Meter
Factor x CCF as occurs on channel 0
I.Status[0].ProverTotal Float REAL
Displays total counts (in engineering units) received on channel 0 in
prover operation.
Total resets when the ProverEnable feature is enabled.
This value operates concurrently with NetVolume, and must be saved if
subtracted from the NetVolume for single and multiple prover
verifications.
I.Status[1].ProverState Decimal SINT
Displays status of the prover operation on channel 1
0 = Prover Not Active
1 = Prover waiting for 1
st
start
2 = Prover waiting for 1
st
stop
3 = Prover waiting for 2
nd
start
4 = Prover waiting for 2
nd
stop
5 = Prover Complete
I.Status[1].FillState Decimal SINT
Displays current state of module for channel 1. These states are
possible:
0 = Filler not active
1 = Filler Enabled only, waiting for start
2 = Timed Trickle Flow complete, not filled
3 = Full Flow for Fill function
4 = Timed Trickle Flow for Fill function
5 = Engineering units for Full Flow
6 = Engineering units for Trickle Flow
7 = Fill complete
I.Status[1].ConsumerErrorCode Decimal INT See Using Error Codes on page 105
Table 15 - Configurable Flowmeter Module Input Tags
Name Style Data Type Definition